Jim Dunlop amps and effects

  • JIM DUNLOP MXR® WYLDE AUDIO PHASE

    Product code: WA90 This pedal adds dimension and dynamics to Zakk Wylde's legendarily blazing solos and razor sharp leads.This pedal is powered by a single 9-volt battery (remove bottom plate to install), a 9-volt AC adapter such as the Dunlop ECB003, or an MXR Brick Series power supply
    17.670,00 RSD
    21.204,00 RSD
  • JIM DUNLOP MXR® SUPER BADASS® VARIAC FUZZ

    Product code: M236 The Super Badass Variac Fuzz is aggressive, biting, and highly versatile, featuring a Variac control to change the pedal's voltage from 5V to 15V for a range of fuzz tones. Go from vintage saggy saturation to wide open transparency with the twist of a knob.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    20.310,00 RSD
    24.372,00 RSD
  • JIM DUNLOP MXR® SCRIPT DYNA COMP® COMPRESSOR

    Product code: CSP102SL The Script Dyna Comp Compressor combines classic MXR compression with a bypass status LED and AC power jack for modern gigging convenience. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    22.294,80 RSD
    26.753,76 RSD
  • MXR® BASS OVERDRIVE

    Product code: M89 The Bass Overdrive delivers burly overdriven tones with a Clean control to blend in a pre-set EQ clean signal. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    20.379,60 RSD
    24.455,52 RSD
  • MXR® STUDIO COMPRESSOR

    Product code: m76 The Studio Compressor provides recording-quality compression with Constant Headroom Technology™ and true bypass switching for clear, clean performance. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    29.786,40 RSD
    35.743,68 RSD
  • MXR® OCTAVIO® FUZZ

    Product code: m267 Explore the furthest reaches of silicon saturation in a trusted vessel with the MXR Octavio Fuzz. Just set the Level and Fuzz controls to your desired volume and intensity, and allow your picking and plucking dynamics to coax out the pedal's legendarily searing, synth-like tones.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    18.600,00 RSD
    22.320,00 RSD
  • MXR® SUPER COMP

    Product code: m132 The Super Comp Compressor updates the Dyna Comp® Compressor with an Attack Level control to preserve initial volume without sacrificing sustain. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    15.676,80 RSD
    18.812,16 RSD
  • MXR® SLASH OCTAVE FUZZ

    Product code: SF01 The Slash Octave Fuzz combines searing fuzz with a sub octave grow and an array of controls for fine-tuning your sinister sound.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    21.480,00 RSD
    25.776,00 RSD
    not available
  • MXR® FOD™ DRIVE

    Product code: M251
    27.014,40 RSD
    32.417,28 RSD
  • MXR® CLONE LOOPER™ PEDAL

    Product code: M303G1 Whether you’re practicing at home, captivating audiences with improvisational compositions onstage, or weaving intricate sonic tapestries in the studio, the Clone Looper Pedal has you covered. Packed into a standard MXR® housing that’s built like a tank, it’s easier to use and delivers higher fidelity signal reproduction than any other looper of its type—hands down.This pedal can be powered by the included Dunlop ECB003 9-volt adapter, or the Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    23.517,60 RSD
    28.221,12 RSD
  • Jim Dunlop ECB035 MXR® / CRY BABY® EFFECT / BYPASS DOUBLE POLE DOUBLE THROW LARGE SWITCH

    Product code: ECB035 This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
    1.257,60 RSD
    1.509,12 RSD
  • Jim Dunlop ECB009G1 18-VOLT AC ADAPTER FOR M237 & M238

    Product code: ECB009G1 For use with the M237 and M238 only.
    2.526,00 RSD
    3.031,20 RSD
  • Jim Dunlop MXR® ISO-BRICK™ POWER SUPPLY

    Product code: M238EU This power supply is light and pedalboard-friendly with ten fully isolated outputs ranging from 9V to 18V-including two variable 6V-15V outputs-and special noise-reduction circuitry for quiet operation.
    23.515,20 RSD
    28.218,24 RSD
  • Jim Dunlop CRY BABY® 95Q WAH

    Product code: 95Q This Cry Baby Wah features a Q control to vary the intensity of the effect, a for up to +15dB added gain, and convenient auto-return switching.
    22.640,40 RSD
    27.168,48 RSD
  • Jim Dunlop BILLY DUFFY CRY BABY® WAH WAH BD95

    Product code: BD95 The Billy Duffy Cry Baby Wah combines two different wahs in a single housing so you can change between modern and classic sounds on the fly.Each wah mode has its own inductor, selectable via a kickswitch on the side of the pedal with LED indicators to show which mode is active. 95Q mode features the same aggressive, high Q inductor as the 95Q Cry Baby Wah, along with its Volume and Q controls. Kicking the switch selects Vintage mode, which uses a warm, low Q inductor custom made for Billy based on one of his favorite vintage Cry Baby pedals.The Billy Duffy Cry Baby Wah features convenient auto-return switching-so you can step in and out during riffs and solos-with an internal control to set...
    30.720,00 RSD
    36.864,00 RSD
  • Jim Dunlop MXR DBL DBL OVERDRIVE

    Product code: M250 The MXR Double-Double Overdrive serves up two classic overdrives in a single housing. Changing between the two is as simple as a flick of the Lo/Hi switch.  The MXR Double-Double Overdrive comes in a road-ready housing with true bypass switching.
    18.600,00 RSD
    22.320,00 RSD
  • Jim Dunlop GREEN RHINO MK4

    Product code: WHE207 The Green Rhino™ Overdrive Mark IV is smaller and more compact than its ancestors, but it has more force than ever behind its mighty charge. In addition to the Volume, Tone, and Drive controls of the original. Want to take this pedal back to its ancestral roots? Just throw the Classic switch to get the simple Volume, Tone, Drive setup and sound of the original Green Rhino Overdrive.  It can take a clean amp from pristine purity to a punchy, dynamic rhythm tone, but put it in front of a distorted channel, and you’ll hear more gain and sustain than you ever thought your amp was capable of.
    19.267,20 RSD
    23.120,64 RSD
  • Jim Dunlop MXR FET Driver M264

    Product code: M264 Creamy, overdriven tube soundSubtle soft-clipping to early stage distortionTrue bypass
    20.160,00 RSD
    24.192,00 RSD
  • Jim Dunlop ECB555 MXR SWTCH-DPDT/PCBMO

    Product code: ECB555 MXR prekidač.
    1.986,00 RSD
    2.383,20 RSD
  • Jim Dunlop ECB-04 Barrel 18V Adapter

    Product code: ECB004EU Properly power your 18-volt pedals with an adapter you can count onThe Dunlop ECB004 18-volt DC Adapter is a quiet, well-regulated power supply that powers most effects pedals that run on 18 volts. With 1000mA of current, the ECB004 can even run power supplies such as the DC Brick. 2.1mm by 5.5mm positive barrel with negative center.Note: Be sure to check the label on the power supply to ensure compatibility with your effects pedal. ECB004 adapters manufactured before summer 2011 had a current rating of 150mA and are NOT compatible with the DC Brick. Newer ECB004 manufactured summer 2011 or later, which are marked with a current rating of 1A (1000mA), can safely be used with the DC Brick.
    3.000,00 RSD
    3.600,00 RSD