Amps and effects

  • MXR® BASS OVERDRIVE

     Product code: M89 The Bass Overdrive delivers burly overdriven tones with a Clean control to blend in a pre-set EQ clean signal. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    20.379,60 RSD
    24.455,52 RSD

  • MXR® PHASE 95

     Product code: m290 The Phase 95 combines the Phase 45 and Phase 90 circuits—toggled by the 45/90 switch—in a mini housing, featuring a Script switch to toggle between modern and vintage style phasing. This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    15.675,60 RSD
    18.810,72 RSD

  • MXR® STUDIO COMPRESSOR

     Product code: m76 The Studio Compressor provides recording-quality compression with Constant Headroom Technology™ and true bypass switching for clear, clean performance. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    29.786,40 RSD
    35.743,68 RSD

  • HARTKE HYDRIVE 500W COMBO 210

     Product code: HMHD500230 SpecificationsRated Output Power 500 watts Peak / 250 watts RMSRated Input Level 77.46mv rms (@1kHz)Total Harmonic Distortion 0.54% (@1dB below rated output, 1kHz typical)Signal To Noise Ratio 1W/49.3dBu (1Wrms @1kHz)Signal Gain Speaker Output 37.1VrmsSignal Gain to Direct Out 4.2VrmsBass Control 70HzMidrange Control 700HzTreble Control 5kHzShape Control 100Hz - 900HzDimensions 19.6” x 12” x 20.27” / 498mm x 305mm x 515mmWeight 34.39lb / 15.6kg
    79.899,60 RSD
    95.879,52 RSD

  • HARTKE HYDRIVE 75W COMBO 12"

     Product code: HMHD75230 SpecificationsRated Output Power 75wRated Input Level (@ 1 kHz) 44.6mv rmsHD150 38.8mv rmsTotal Harmonic Distortion (@ 1 dB below rated output, 1 kHz typical) 0.32%Signal To Noise Ratio 1W/62dBSignal Gain Speaker Output 35VSignal Gain to Send Jack 545mVBass Control 50 HzMid Control 700 HzTreble Control 10 kHzSeven-Band Graphic EQ Frequencies 63Hz, 125Hz, 250Hz, 500Hz, 1.25kHz, 2.5kHz, 5kHzDimensions 19.9” x 18.6” x 13.9” / 506mm x 472mm x 353mmWeight 48.2lb / 24.7kg
    36.980,40 RSD
    44.376,48 RSD

  • HARTKE HYDRIVE 15W COMBO 6.5"

     Product code: HMHD15230 SpecificationsRated Output Power 15W (@1 kHz, 4 ohm, 1% THD)Rated Input Level -28dBV (@ 1 kHz)Total Harmonic Distortion 0.13% (@ 1 dB below rated output, 1 kHz typical)Signal To Noise Ratio 57dB (1 Wrms @ 1 kHz)Signal Gain 46dBBass Control 100 HzMid Control 400 HzTreble Control 10 kHzHeadphone Output 137mW/32 ohms (-10dBu,100Hz)Dimensions) 12.5” x 12.2” x 8” / 316 mm x 309 mm x 202 mmWeight 13.44lb / 6.1 kg
    12.980,40 RSD
    15.576,48 RSD

  • HARTKE KICKBACK 15 / 500 WATTS

     Product code: HMKB15230 SpecificationsRated Output Power 500 watts Peak / 250 watts RMSRated Input Level 77.46mv rms (@1kHz)Total Harmonic Distortion 0.54% (@1dB below rated output, 1kHz typical)Signal To Noise Ratio 1W/49.3dBu (1Wrms @1kHz)Signal Gain Speaker Output 37.1VrmsSignal Gain to Direct Out 4.2VrmsBass Control 70HzMidrange Control 700HzTreble Control 5kHzShape Control 100Hz - 900HzDimensions 16.73” x 17.55” x 21.25” / 425mm x 446mm x 540mmWeight 35.6lb / 16.2kg
    69.800,40 RSD
    83.760,48 RSD

  • JERRY CANTRELL FIREFLY CRY BABY® WAH

     Product code: JC95FFS This special edition of the Jerry Cantrell Cry Baby Wah is inspired by the frontman’s latest solo record, Brighten, with glow-in-the-dark features and a subdued raw-iron finish.
    31.780,80 RSD
    38.136,96 RSD

  • MXR® OCTAVIO® FUZZ

     Product code: m267 Explore the furthest reaches of silicon saturation in a trusted vessel with the MXR Octavio Fuzz. Just set the Level and Fuzz controls to your desired volume and intensity, and allow your picking and plucking dynamics to coax out the pedal's legendarily searing, synth-like tones.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    18.600,00 RSD
    22.320,00 RSD

  • MXR® SUPER COMP

     Product code: m132 The Super Comp Compressor updates the Dyna Comp® Compressor with an Attack Level control to preserve initial volume without sacrificing sustain. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    15.676,80 RSD
    18.812,16 RSD

  • MXR® SLASH OCTAVE FUZZ

     Product code: SF01 The Slash Octave Fuzz combines searing fuzz with a sub octave grow and an array of controls for fine-tuning your sinister sound.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    21.480,00 RSD
    25.776,00 RSD

  • SLASH CRY BABY® WAH

     Product code: sw95 This Cry Baby Wah combines high gain distortion with the Classic circuit for Slash's cutting lead tone, with LEDs to indicate effect status. This pedal can be powered by two 9-volt batteries, a 18-volt adapter or the DC Brick™, Iso-Brick™ and Mini Iso-Brick™ power supplies.
    30.192,00 RSD
    36.230,40 RSD

  • ASHDOWN - MAS WOODSMAN-PARLOUR

     Product code: MAS WOODSMAN-PARLOUR - Category : Acoustic amp- Color : Brown- EQ : 3 channels- Finishing : Brown- Input : jack, aux jack, XLR/jack- Number of channels : 2- Number of effects : 1- Power output : 25 W- Reverb : Yes- Speaker diameter : 8"- Technology : Solid state
    37.599,60 RSD
    45.119,52 RSD

  • MXR® FOD™ DRIVE

     Product code: M251
    27.014,40 RSD
    32.417,28 RSD

  • THE PUSHER COMPRESSOR

     Product code: RPU1 Vintage style compressor pedalHigh headroomSmooth wide range control of ratio, compression on one control and expansion on anotherUnique control of silicon and germanium signal pathTrue bypass switchingDesigned by John Oram of VOX & TRIDENT historyAuthentic components and hand wired assembly methodsReal authentic 60’s design techniques using today’s technological approachSuper low power LED indicating unit powered on and effect rate speedInput socket for power supply connection (9 volt to 18 volt internally regulated)
    26.058,00 RSD
    34.657,14 RSD

  • THE CRUSADER CHORUS

     Product code: RTC1 Organic sounding chorus pedalHigh headroomSmooth wide range control of rate and depthChorus effect can be mixed from min to max with LEVEL controlAudio dynamics controller providing noise reductionTrue bypass switchingDesigned by John Oram of VOX & TRIDENT historyAuthentic components and hand wired assembly methodsReal authentic 60’s design techniques using today’s technological approachSuper low power LED indicating unit powered on and effect rate speedInput socket for power supply connection (9 volt to 18 volt internally regulated)
    20.844,00 RSD
    27.722,52 RSD

  • VOLUME (X)™ MINI PEDAL

     Product code: DVP4 The Volume (X) Mini Pedal controls volume and FX parameters without crowding your pedalboard, featuring a lightweight aluminum chassis, aggressive non-slip tread, and our patented Low Friction Band-Drive for a smooth range of motion and consistent, reliable performance. For maximum comfort and precision, the DVP4's rocker tension is fully adjustable.
    18.007,20 RSD
    21.608,64 RSD

  • MXR® CLONE LOOPER™ PEDAL

     Product code: M303G1 Whether you’re practicing at home, captivating audiences with improvisational compositions onstage, or weaving intricate sonic tapestries in the studio, the Clone Looper Pedal has you covered. Packed into a standard MXR® housing that’s built like a tank, it’s easier to use and delivers higher fidelity signal reproduction than any other looper of its type—hands down.This pedal can be powered by the included Dunlop ECB003 9-volt adapter, or the Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    23.517,60 RSD
    28.221,12 RSD

  • Jim Dunlop ECB035 MXR® / CRY BABY® EFFECT / BYPASS DOUBLE POLE DOUBLE THROW LARGE SWITCH

     Product code: ECB035 This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
    1.257,60 RSD
    1.509,12 RSD

  • Jim Dunlop ECB009G1 18-VOLT AC ADAPTER FOR M237 & M238

     Product code: ECB009G1 For use with the M237 and M238 only.
    2.526,00 RSD
    3.031,20 RSD