Amps and effects

  • MARSHALL MG15GR 15W GITARSKO POJAČALO

    Product code: MG15GR-E Izlazna snaga: 15WIzlazi: 1 x 3.5mm džek izlaz za slušaliceUlazi: 1 x 1/4" džek ulaz za instrument, 1 x 3.5mm Aux inKontrole - Clean jačina zvuka, dugme za odabir kanala, overdrive gain, overdrive, bas, srednji tonovi, visoki tonovi, reverbEfekti: ReverbLup efekata: NeKonfiguracija zvučnika: 1x8"Model zvučnika: Posebno podešeni zvučniciImpedansa: 8ΩPedala: NeKabl: fiksni kabl za napajanjeDimenzije (uključujući nogare i dršku)Širina: 375 mm / 14.8"Visina: 370 mm / 14.6"Dubina: 195 mm / 7.7"Težina: 7.8kg
    23.430,00 RSD
    28.116,00 RSD
  • MXR® BASS OVERDRIVE

    Product code: M89 The Bass Overdrive delivers burly overdriven tones with a Clean control to blend in a pre-set EQ clean signal. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    20.379,60 RSD
    24.455,52 RSD
  • MXR® STUDIO COMPRESSOR

    Product code: m76 The Studio Compressor provides recording-quality compression with Constant Headroom Technology™ and true bypass switching for clear, clean performance. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    29.786,40 RSD
    35.743,68 RSD
  • HARTKE HYDRIVE 500W COMBO 210

    Product code: HMHD500230 SpecificationsRated Output Power 500 watts Peak / 250 watts RMSRated Input Level 77.46mv rms (@1kHz)Total Harmonic Distortion 0.54% (@1dB below rated output, 1kHz typical)Signal To Noise Ratio 1W/49.3dBu (1Wrms @1kHz)Signal Gain Speaker Output 37.1VrmsSignal Gain to Direct Out 4.2VrmsBass Control 70HzMidrange Control 700HzTreble Control 5kHzShape Control 100Hz - 900HzDimensions 19.6” x 12” x 20.27” / 498mm x 305mm x 515mmWeight 34.39lb / 15.6kg
    79.899,60 RSD
    95.879,52 RSD
  • HARTKE HYDRIVE 75W COMBO 12"

    Product code: HMHD75230 SpecificationsRated Output Power 75wRated Input Level (@ 1 kHz) 44.6mv rmsHD150 38.8mv rmsTotal Harmonic Distortion (@ 1 dB below rated output, 1 kHz typical) 0.32%Signal To Noise Ratio 1W/62dBSignal Gain Speaker Output 35VSignal Gain to Send Jack 545mVBass Control 50 HzMid Control 700 HzTreble Control 10 kHzSeven-Band Graphic EQ Frequencies 63Hz, 125Hz, 250Hz, 500Hz, 1.25kHz, 2.5kHz, 5kHzDimensions 19.9” x 18.6” x 13.9” / 506mm x 472mm x 353mmWeight 48.2lb / 24.7kg
    36.980,40 RSD
    44.376,48 RSD
  • HARTKE KICKBACK 15 / 500 WATTS

    Product code: HMKB15230 SpecificationsRated Output Power 500 watts Peak / 250 watts RMSRated Input Level 77.46mv rms (@1kHz)Total Harmonic Distortion 0.54% (@1dB below rated output, 1kHz typical)Signal To Noise Ratio 1W/49.3dBu (1Wrms @1kHz)Signal Gain Speaker Output 37.1VrmsSignal Gain to Direct Out 4.2VrmsBass Control 70HzMidrange Control 700HzTreble Control 5kHzShape Control 100Hz - 900HzDimensions 16.73” x 17.55” x 21.25” / 425mm x 446mm x 540mmWeight 35.6lb / 16.2kg
    69.800,40 RSD
    83.760,48 RSD
  • MXR® OCTAVIO® FUZZ

    Product code: m267 Explore the furthest reaches of silicon saturation in a trusted vessel with the MXR Octavio Fuzz. Just set the Level and Fuzz controls to your desired volume and intensity, and allow your picking and plucking dynamics to coax out the pedal's legendarily searing, synth-like tones.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    18.600,00 RSD
    22.320,00 RSD
  • MXR® SUPER COMP

    Product code: m132 The Super Comp Compressor updates the Dyna Comp® Compressor with an Attack Level control to preserve initial volume without sacrificing sustain. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    15.676,80 RSD
    18.812,16 RSD
  • MXR® SLASH OCTAVE FUZZ

    Product code: SF01 The Slash Octave Fuzz combines searing fuzz with a sub octave grow and an array of controls for fine-tuning your sinister sound.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    21.480,00 RSD
    25.776,00 RSD
    not available
  • ASHDOWN - MAS WOODSMAN-PARLOUR

    Product code: MAS WOODSMAN-PARLOUR - Category : Acoustic amp- Color : Brown- EQ : 3 channels- Finishing : Brown- Input : jack, aux jack, XLR/jack- Number of channels : 2- Number of effects : 1- Power output : 25 W- Reverb : Yes- Speaker diameter : 8"- Technology : Solid state
    37.599,60 RSD
    45.119,52 RSD
  • MXR® FOD™ DRIVE

    Product code: M251
    27.014,40 RSD
    32.417,28 RSD
  • THE PUSHER COMPRESSOR

    Product code: RPU1 Vintage style compressor pedalHigh headroomSmooth wide range control of ratio, compression on one control and expansion on anotherUnique control of silicon and germanium signal pathTrue bypass switchingDesigned by John Oram of VOX & TRIDENT historyAuthentic components and hand wired assembly methodsReal authentic 60’s design techniques using today’s technological approachSuper low power LED indicating unit powered on and effect rate speedInput socket for power supply connection (9 volt to 18 volt internally regulated)
    26.058,00 RSD
    34.657,14 RSD
  • THE CRUSADER CHORUS

    Product code: RTC1 Organic sounding chorus pedalHigh headroomSmooth wide range control of rate and depthChorus effect can be mixed from min to max with LEVEL controlAudio dynamics controller providing noise reductionTrue bypass switchingDesigned by John Oram of VOX & TRIDENT historyAuthentic components and hand wired assembly methodsReal authentic 60’s design techniques using today’s technological approachSuper low power LED indicating unit powered on and effect rate speedInput socket for power supply connection (9 volt to 18 volt internally regulated)
    20.844,00 RSD
    27.722,52 RSD
  • MARSHALL MG10

    Product code: MG10G-E
    12.960,00 RSD
    15.552,00 RSD
  • MXR® CLONE LOOPER™ PEDAL

    Product code: M303G1 Whether you’re practicing at home, captivating audiences with improvisational compositions onstage, or weaving intricate sonic tapestries in the studio, the Clone Looper Pedal has you covered. Packed into a standard MXR® housing that’s built like a tank, it’s easier to use and delivers higher fidelity signal reproduction than any other looper of its type—hands down.This pedal can be powered by the included Dunlop ECB003 9-volt adapter, or the Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
    23.517,60 RSD
    28.221,12 RSD
  • Jim Dunlop ECB035 MXR® / CRY BABY® EFFECT / BYPASS DOUBLE POLE DOUBLE THROW LARGE SWITCH

    Product code: ECB035 This is a large double pole double throw (DPDT) effect/bypass switch for MXR and Cry Baby pedals, featuring the Dunlop “D” logo.
    1.257,60 RSD
    1.509,12 RSD
  • Jim Dunlop ECB009G1 18-VOLT AC ADAPTER FOR M237 & M238

    Product code: ECB009G1 For use with the M237 and M238 only.
    2.526,00 RSD
    3.031,20 RSD
  • Jim Dunlop MXR® ISO-BRICK™ POWER SUPPLY

    Product code: M238EU This power supply is light and pedalboard-friendly with ten fully isolated outputs ranging from 9V to 18V-including two variable 6V-15V outputs-and special noise-reduction circuitry for quiet operation.
    23.515,20 RSD
    28.218,24 RSD
  • Jim Dunlop CRY BABY® 95Q WAH

    Product code: 95Q This Cry Baby Wah features a Q control to vary the intensity of the effect, a for up to +15dB added gain, and convenient auto-return switching.
    22.160,40 RSD
    26.592,48 RSD
  • Jim Dunlop BILLY DUFFY CRY BABY® WAH WAH BD95

    Product code: BD95 The Billy Duffy Cry Baby Wah combines two different wahs in a single housing so you can change between modern and classic sounds on the fly.Each wah mode has its own inductor, selectable via a kickswitch on the side of the pedal with LED indicators to show which mode is active. 95Q mode features the same aggressive, high Q inductor as the 95Q Cry Baby Wah, along with its Volume and Q controls. Kicking the switch selects Vintage mode, which uses a warm, low Q inductor custom made for Billy based on one of his favorite vintage Cry Baby pedals.The Billy Duffy Cry Baby Wah features convenient auto-return switching-so you can step in and out during riffs and solos-with an internal control to set...
    30.720,00 RSD
    36.864,00 RSD